The makers pack for bracketing systems is delivered in 2 parts. There is the generic pack that contains all the universal screws and nuts that are required to assemble your bracketing system.

The second part is for your specific machine and what additional screws would be required to finish building. 

The generic pack contains:

(2) steel nut plate for the back of the track bracket.  

(4) 6x4mm n52 magnets 

(2) M5x20 socket screws 

(2) M4x50 Socket screws 

(2) M4x45 socket screws 

(2) M3x10 socket screws 

(2) M5 Locking Nuts 

(2) M4 Nuts