You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
Home > Dust Boots > Boot Assembly > How to make v6
How to make v6
print icon

For the makers out there, this is what required to make the V6 boot yourself and below is how you would assemble it. 

Dust Boot v6 - Brush

Dust Boot v6 - Acrylic

Dust Boot v6 for Makers (Files only, Makers pack only, or Both selection in drop down)


The V6 is the simplest boot we have to make, requiring (10) short m3 heat inserts, and (5) m3 heat inserts, and only magnets for the wings. 






Now over to our assembly area for the V6

0 out of 0 found this helpful

scroll to top icon