You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
Manual and Programming
print icon

We ship our Version 3 spindle kit manual full-color printed.  It has not changed much from Version 2 and details many aspects required to install the spindle kit for many of the most CNC machines.


Be very careful performing certain actions described within the manual... some will wipe your VFD's programming and could void your warrantee.


You'll also find attached our v3 programming guide.  This paper includes our internal wiring diagram and VFD program settings required to make this all work.

Our VFD is wired differently based on how your CNC machine controls the spindle kit... either Modbus or PWM.  

We program the VFD with your motor and general settings on page 1 while page 2 outlines program settings and wiring specific to each control method.

0 out of 0 found this helpful


scroll to top icon