You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
Home > Other Products > Clamping
print icon

Properly securing your stock is very important with every CNC operation. We have many clamping options, all low cost, and easily replaced if accidents happen.


The PwnCNC Lever Clamp was our first product, and is one of the few products that remains largely unchanged since initial release. 

Featuring a sliding hole that allows to adjust the tension depending on the height of the workpiece and locks in place with raised ridges, and (2) notched ends so each side can be used as a clamping surface.  



0 out of 0 found this helpful

scroll to top icon